Multi unit
Trust-on-4 is an immediately loaded tooth restoration. The prosthesis is placed on the implants on the third day after surgery. Trust-on-4 allows four implants to be placed - two in the anterior region and two in the area of 5-6 teeth in the lower jaw. With the help of straight and angled abutments "Multi-Unit", a fixed screw-on prosthetic structure is created.
The multi-component abutments "Multi-Unit" provide screw fixation of the prosthesis without cement. The structure can be removed by loosening the fixation screws.
Technical characteristics
"Multi-Unit", developed in 2000, differs from traditional abutments in design details. The abutment components are attached with a hexagonal conical connection. It is available in a wide range of sizes with different ledge heights. The taper angle is 17 and 30 degrees. The variability of sizes allows the Multi-Unit to be used in various clinical cases.
Orthopaedic implantation protocol with the "Multi-Unit" system is carried out with special transfers and analogues.
The "Multi-Unit" system is supplied with the necessary accessories.
At the customer's request, the Multi-Unit abutment can be shipped with or without accessories.
| Small platform | Description | Big platform | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Height | 1 mm | 2 mm | 3 mm | 4 mm | 4 mm | 3 mm | 2 mm | 1 mm | |
| REF | 7.00 | 7.01 | 7.02 | 7.03 | Multi Unit Kit 0˚ | 7.15 | 7.14 | 7.13 | 7.12 |
| 7.04-SET | 7.05-SET | 7.20-SET | 7.21-SET | Multi Unit Kit 17˚ | 7.23-SET | 7.22-SET | 7.17-SET | 7.16-SET | |
| 7.06-SET | 7.07-SET | 7.24-SET | 7.25-SET | Multi Unit Kit 30˚ | 7.27-SET | 7.26-SET | 7.19-SET | 7.18-SET | |
Straight abutments make it possible to compensate for the divergence of implants up to 40˚
Angled abutments 17˚ make it possible to compensate for the divergence of implants up to 75˚
Angled abutments 30˚ make it possible to compensate for the divergence of implants up to 100˚
KIT
Straight abutment kit consists of:
- abutment
- plastic holder
- modelling cap with fixing screw
- healing cap
Angled abutment kit consists of:
- abutment and fixing screw
- metal holder
- modelling cap with fixing screw
- healing cap
REF 7.08-SET. Temporary Abutment for Multi Unit
REF 7.09-SET. Healing Cap for Multi-Unit
REF 7.10-SET. Modeling Cap for Multi-Unit
REF 4.10-SET. Transfer coping for Multi-Unit
REF 4.13-SET. Laboratory analog for Multi-Unit
Installation visualisation
